Rail

TFMi™ Inspection for monitoring "Blind" Holes

A026_Figure 3_ Weak signal.png

21st February 2023

Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.

Application Notes

Remote NDT - Field Applications and User Cases

Veo+ side view with scan

1st April 2020

The remote control capabilities of instruments nowadays ease the development of new NDT applications, especially in harsh environments or restricted areas where it can be difficult to bring together measurement instrument and technician.

Technical Papers

Thickness Logging Compliant with AlphaGage+

AlphagGage+ with Screenshot.jpg

27th March 2020

Wear rates can be calculated and used to estimate when the minimum allowable thickness will remain with the AlphaGage+

Solutions

Thickness logging with D-50

T-Log Probes

27th March 2020

The T-log feature of the Sitescan D-50 allows users to record multiple thickness measurements of a corroded area.

Solutions

Wave Nozzle Inspection

A014

27th March 2020

In an A-Scan only view, signals can be difficult to interpret. Small inaccuracies in probe positioning or the angle of reflection may place a signal as a defect in the weld when in fact it is a reflection from the internal wall.

Application Notes