Mining

TFMi™ Inspection for monitoring "Blind" Holes

A026_Figure 3_ Weak signal.png

21st February 2023

Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.

Application Notes

Wave Inspection of Nozzles and Nodes with non-uniform circumferential weld profiles

10th November 2021

The inspection of nozzles and nodes requires a high level of skill and experience for both inspection and interpretation.

Application Notes

Phased Array Bolt Inspection, Encoded and Freehand

10th November 2021

Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure pipework and holding wind turbine blades in place.

Application Notes

Build Your Expertise With Confidence

Veo3 Live TFM Multiple FMC Sources.png

17th June 2021

In the past decade, there have been few revolutions in the world of advance ultrasonic technologies; the latest is the introduction of Total Focusing Method (TFM).

Technical Papers

TFMi™: Using Intermodal Analysis to Improve TFM Imaging

Veo3 TFMi Thumbnail.png

17th June 2021

Total Focussing Method (TFM) is a term given to the mathematical processing of waveforms
collected by a phased array data acquisition process to provide an image of a volume under
inspection.

Technical Papers