Manufacturing

Low Frequency GFRP Imaging with Variable Aperture TFM

P016 Thumbnail.png

15th June 2023

Technical Papers

Composite Inspection Benefits and Challenges Using Ultrasonic NDT Solutions

P017 Thumbnail.png

15th June 2023

Ultrasonic Non-Destructive Testing (NDT) is widely used by engineers to inspect a range of composite materials including aluminium laminates and carbon fiber-based composites.

Technical Papers

Advanced Composite Inspection

SO15_RSflite_Application_Photo_68.png

12th June 2023

A complete picture of a large component can be produced by stitching C-scans together in the UTmap software.

Solutions

Riser Bolt Inspection with Creo Bolt Scanner

A027 Intro

11th April 2023

Sonatest performed Phased Array Ultrasonic Testing on one Riser Bolt. A TFM scan was also implemented to increase resolution and flaw fidelity. The bolt can be tested from either end, without removing the bolt from production for testing.

Application Notes

TFMi™ Inspection for monitoring "Blind" Holes

A026_Figure 3_ Weak signal.png

21st February 2023

Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.

Application Notes