Service Company

Thickness logging with D-50

27th March 2020

The T-log feature of the Sitescan D-50 allows users to record multiple thickness measurements of a corroded area.

Solutions

Wave Nozzle Inspection

27th March 2020

In an A-Scan only view, signals can be difficult to interpret. Small inaccuracies in probe positioning or the angle of reflection may place a signal as a defect in the weld when in fact it is a reflection from the internal wall.

Application Notes

Manual Phased Array Corrosion Investigation using a Prisma

26th March 2020

An easy-to-use solution to assess the remaining wall thickness of tubes, pipes and vessels.

Solutions

Low Frequency PA Inspection

16th March 2020

The inspection of heavy composites thicker than 50 mm (2 inches) causes significant limitations for conventional phased array probes.

Solutions

Inspection of Composite Materials

24th October 2019

Composites have become a dominant material in the Aerospace, Automotive and Energy sectors as well as many more areas where they are providing innovative solutions over the conventional materials used in the past. Here we discuss the ultrasonic inspection methods for composite materials.