Marine
Thickness Logging Compliant with AlphaGage+
27th March 2020
Wear rates can be calculated and used to estimate when the minimum allowable thickness will remain with the AlphaGage+
Solutions
Thickness logging with D-50
27th March 2020
The T-log feature of the Sitescan D-50 allows users to record multiple thickness measurements of a corroded area.
Solutions
Wave Nozzle Inspection
27th March 2020
In an A-Scan only view, signals can be difficult to interpret. Small inaccuracies in probe positioning or the angle of reflection may place a signal as a defect in the weld when in fact it is a reflection from the internal wall.
Application Notes
Manual Phased Array Corrosion Investigation using a Prisma
26th March 2020
An easy-to-use solution to assess the remaining wall thickness of tubes, pipes and vessels.
Solutions
Low Frequency PAUT Inspection of GFRP
16th March 2020
Certain heterogeneous materials can be highly attenuative to ultrasound. As a result, lower frequency probes are required, especially for thick sections which otherwise can be difficult to inspect.
Application Notes