Application Notes

Riser Bolt Inspection with Creo Bolt Scanner

11th April 2023

Sonatest performed Phased Array Ultrasonic Testing on one Riser Bolt. A TFM scan was also implemented to increase resolution and flaw fidelity. The bolt can be tested from either end, without removing the bolt from production for testing.

Application Notes

TFMi™ Inspection for monitoring "Blind" Holes

21st February 2023

Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.

Application Notes

Phased Array Bolt Inspection, Encoded and Freehand

10th November 2021

Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure pipework and holding wind turbine blades in place.

Application Notes

Wind Turbine Bolt Inspection Utilising Ultrasonic Phased Arrays

10th November 2021

Bolts are vital for the long and safe running of wind turbines both on and offshore, they can be found in the Foundation, intersection flanges in the tower, holding the blades and in multiple areas within the Nacelle as well as ancillary structures.

Application Notes

Wave Inspection of Nozzles and Nodes with non-uniform circumferential weld profiles

10th November 2021

The inspection of nozzles and nodes requires a high level of skill and experience for both inspection and interpretation.

Application Notes