Industrex Single Part Developer Replenisher
Overview
Ideal for 5-minute automatic or 4-minute manual cycles for processing of all NDT films. Single Part Developer Replenisher is an all-in-one developer and replenisher; it is only necessary to add water to the proper dilution.
For further information on pricing and availability please email our dedicated Carestream Industrex team. Click here.
Features
- High chemical stability for image quality over time, improved resistance to aerial oxidation, clean working formula.
- Reduced packaging, less solid waste.
- Strengthened "activation power" allows for fast processing and high productivity.
- Outstanding, consistent image quality - cold (blue) image "tone and low granularity.
- Reduced environmental impact-lower COD and BOD5 (5-days Biochemical Oxygen Demand)
- Concentrated (single part) liquid developer provides ease of use
- Working strength SG 1.078
Order No: 5315288
Resources
Ultrasonic Inspection Methods for Composites in Motosports
Composites have become a dominant material in motorsport, accounting for up to 85% of the vehicles used today. This includes all levels of Formula racing including F1, as well as Rally car racing, Moto GP, Karting and many more.
Low Frequency GFRP Imaging with Variable Aperture TFM
Composite Inspection Benefits and Challenges Using Ultrasonic NDT Solutions
Ultrasonic Non-Destructive Testing (NDT) is widely used by engineers to inspect a range of composite materials including aluminium laminates and carbon fiber-based composites.
Advanced Composite Inspection
A complete picture of a large component can be produced by stitching C-scans together in the UTmap software.
Riser Bolt Inspection with Creo Bolt Scanner
Sonatest performed Phased Array Ultrasonic Testing on one Riser Bolt. A TFM scan was also implemented to increase resolution and flaw fidelity. The bolt can be tested from either end, without removing the bolt from production for testing.
TFMi™ Inspection for monitoring "Blind" Holes
Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.
Phased Array Technique for Inspection of Contact Point Corrosion
The PA-CAT™ phased array technique developed by Holloway NDT & Engineering Inc. is an attenuation-based modelling algorithm used to evaluate the minimum remaining wall thickness at pipe or vessel supports.
Wave Inspection of Nozzles and Nodes with non-uniform circumferential weld profiles
The inspection of nozzles and nodes requires a high level of skill and experience for both inspection and interpretation.
Phased Array Bolt Inspection, Encoded and Freehand
Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure pipework and holding wind turbine blades in place.
Wind Turbine Bolt Inspection Utilising Ultrasonic Phased Arrays
Bolts are vital for the long and safe running of wind turbines both on and offshore, they can be found in the Foundation, intersection flanges in the tower, holding the blades and in multiple areas within the Nacelle as well as ancillary structures.
Downloads
| Date | Title | Version | Size | |
|---|---|---|---|---|
| 06.09.2016 | MSDS INDUSTREX Single Part Developer Replenisher | V5.040001 | 93.02 KB | Download |