Cables and Accessories
Overview
Our range of cables and accessories work in conjunction with your Sonatest NDT equipment.
| CABLE TYPE | PART NUMBER | PRODUCT CODE | |
| Lemo 1 to Subvis | Single Twin | PC-LS TPC-LS | 152056 152061 |
| Lemo 1 to Microdot | Single Twin | PC-LD TPC-LD | 152057 152062 |
| Lemo 1 to Lemo 00 | Single Twin | PC-LZ TPC-LZ | 152076 152088 |
| Lemo 1 to Lemo 1 | Single | PC-LL | 152074 |
| Lemo 1 to UHF* | Single | PC-LU | 152059 |
| Lemo 1 to BNC | Single Twin | PC-BL TCP-BL | 152055 152075 |
| BNC to Subvis | Single Twin | PC-BS TPC-BS | 152022 152023 |
| BNC to Microdot | Single Twin | PC-BD TPC-BD | 152052 152060 |
| BNC to Lemo 00 | Single Twin | PC-BZ TPC-BZ | 152086 152087 |
| BNC to BNC | Single Twin | PC-BB TPC-BB | 152053 152068 |
| BNC to UHF* | Single | PC-BU | 152058 |
| BNC to Lemo 1 | Single | PC-BL | 152055 |
| Lemo 00 to Lemo 00 | Single Twin | PC-ZZ TPC-ZZ | 152122 152089 |
| Fischer to Lemo 00 | Single Twin | PC-FZ TPC-FZ | 152124 152129 |
| Lemo 00 to Microdot | Single Twin | PC-ZD TPC-ZD | 152102 152115 |
| Lemo 00 to Subvis | Single Twin | PC-ZS TPC-ZS | 152123 152108 |
Resources
Ultrasonic Inspection Methods for Composites in Motosports
Composites have become a dominant material in motorsport, accounting for up to 85% of the vehicles used today. This includes all levels of Formula racing including F1, as well as Rally car racing, Moto GP, Karting and many more.
Low Frequency GFRP Imaging with Variable Aperture TFM
Composite Inspection Benefits and Challenges Using Ultrasonic NDT Solutions
Ultrasonic Non-Destructive Testing (NDT) is widely used by engineers to inspect a range of composite materials including aluminium laminates and carbon fiber-based composites.
Advanced Composite Inspection
A complete picture of a large component can be produced by stitching C-scans together in the UTmap software.
Riser Bolt Inspection with Creo Bolt Scanner
Sonatest performed Phased Array Ultrasonic Testing on one Riser Bolt. A TFM scan was also implemented to increase resolution and flaw fidelity. The bolt can be tested from either end, without removing the bolt from production for testing.
TFMi™ Inspection for monitoring "Blind" Holes
Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.
Phased Array Technique for Inspection of Contact Point Corrosion
The PA-CAT™ phased array technique developed by Holloway NDT & Engineering Inc. is an attenuation-based modelling algorithm used to evaluate the minimum remaining wall thickness at pipe or vessel supports.
Wave Inspection of Nozzles and Nodes with non-uniform circumferential weld profiles
The inspection of nozzles and nodes requires a high level of skill and experience for both inspection and interpretation.
Phased Array Bolt Inspection, Encoded and Freehand
Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure pipework and holding wind turbine blades in place.
Wind Turbine Bolt Inspection Utilising Ultrasonic Phased Arrays
Bolts are vital for the long and safe running of wind turbines both on and offshore, they can be found in the Foundation, intersection flanges in the tower, holding the blades and in multiple areas within the Nacelle as well as ancillary structures.