Small Bore Welded Pipe – Single Sided Inspection
The Bracelet Scanner is designed specifically for circumferential welds in small bore pipework.
The Bracelet Scanner is designed specifically for circumferential welds in small bore pipework. This manually operated belt type scanner is the ultimate scanning aid for phased array inspection of circumferential welds from 0.5” to 6” (12mm to 150mm). It is extremely simple to set up and its low-profile design makes it the perfect tool to use in areas with limited access. The Bracelet Scanner is commonly supplied as a single sided configuration making it suitable for pipe-to-fitting inspection.
Recommended Package
|
Category |
Part Number |
Description |
|---|---|---|
|
Product |
PRISMA UT BNC KIT or PRISMA UT LEMO KIT |
Prisma UT BNC Standard Kit or Prisma UT LEMO Standard Kit |
|
Product option |
SW-PRISMA-PA16 |
Prisma Software 16:16 PA |
|
Probes |
X0A-003 |
X0A-7.5M16EFC35-0.5x10-SQX5 (Low profile probes) |
|
Wedges |
Wedges are included with the scanner kit |
Wedge AOD: 0.5'', 0.75'', 1'', 1.25'', 1.5'', 2'', 2.5'', 3'', 3.5'', 4'' and flat. |
|
Scanner |
PX-BRA-S-0.5'' TO 6'' |
Single Small Bore Pipe Scanner with irrigation kit included |
|
Pump |
JX-CMA014 JX-1003 ( Irrigation tube) |
Portable Manual Couplant Pump - 7.9 litre (2.1 US gallon) |
For faster data acquisition, VEO+ is recommended.
Frequency recommendations according to the thickness (T):
By default 7.5 MHz
T>30 mm = 2.25 MHz
15 mm<T<30 mm = 5MHz
4 mm<T<15 mm = 7.5 MHz
T<4mm = 10MHz
For further information, please contact the Sonatest Sales Team: sales@sonatest.com