Small Bore Welded Pipe – Double Sided Inspection
The Bracelet Scanner is designed specifically for inspecting circumferential welds in small bore pipework.
The Bracelet Scanner is designed specifically for inspecting circumferential welds in small bore pipework. This manually operated belt type scanner is the ultimate scanning aid for phased array inspection of circumferential welds from 1.5” to 4”(38mm to 100mm). It is extremely simple to set up and its low-profile design makes it the perfect tool to use in areas with limited access. The Bracelet Scanner, in dual sided configuration with two phased array transducers, is perfect for complete weld inspection in one scan.
Recommended Package
|
Category |
Part Number |
Description |
|---|---|---|
|
Product |
Veo3 32:64PR BNC or Veo3 32:64PR LEMO |
Veo3 32:64PR / 2UT:PR Kit BNC or Veo3 32:64PR / 2UT:PR Kit LEMO |
|
Product option |
SW-Veo3 PA32 |
Upgrade to 32 pulsers/receivers |
|
Probes |
X0A-003 (2x) Splitter 32:32 Splitter 64:64 if 128 channel configuration) |
X0A-7.5M16EFC35-0.5x10-SQX5(low profile probes) Note: Probes are available in double configuration, making the PA splitter adapter irrelevant |
|
Wedges |
Wedges are included with the scanner kit |
Wedge AOD: 0.5'', 0.75'', 1'', 1.25'', 1.5'', 2'', 2.5'', 3'', 3.5'', 4'' and flat. |
|
Scanner |
PX-BRA-D-1.5'' TO 4'' |
Dual Small Bore Pipe Scanner with irrigation kit included |
|
Pump |
JX- CMA013 JX-1003 (irrigation tube) |
Portable Manual Couplant Pump- 2 gallons |
Frequency recommendation according to the thickness (T):
By default 7.5MHz
T > 30mm = 2.25MHz
15mm < T < 30mm = 5MHz
4mm < T < 15mm 7.5MHz
T < 4mm = 10MHz
For further information, please contact the Sonatest Sales Team: sales@sonatest.com