Long Seam Weld Inspection – Manual

This package is specifically created for a quick and easy solution to manually inspect Long Seam Welds.

This package is specifically created for a quick and easy solution to manually inspect Long Seam Welds. An all-in-one embedded feature that only requires a single Phased Array platform (Veo3) without the need for additional software tools. The main advantage of the setup is the reliability and repeatability of data acquisition, that is supplemented with a comprehensive user interface for easier visualisation of the curved surfaces. Ultimately simple to use but effective features significantly improve the characterisation of flaws.

Veo3 Long Seam Inspection

Recommended Package

Category	Part Number	Description
Product	VEO3 32:64PR BNC Or VEO3 32:64PR LEMO	VEO3 32:64PR / 2UT:PR Kit BNC or VEO3 32:64PR / 2UT:PR Kit LEMO
Instrument Options	SW-VEO3PA32 SW-VEO3PACSC	Upgrade to 32 pulsers/receivers SW Option: Phased Array Curved Surface Correction
Probes	D1A-002 (2x) or X2B-001 (2x)	D1A-5M32E-0.8x12 or X2B-5M32E-0.6x10
Wedges	D1AW-009 (2x) or X2BW-007 (2x) for each COD: 4'', 6'', 8'', 12'', 16'', 24'' and 38''	D1AW-N57S-IHC or X2BW-N60S-IHC
Cable	D1-CABLE-004	D1-CABLE-D-QX5 (5 metre cable)
Encoder	Jireh JX-1004 Phoenix • PX-C-Clamp	Jireh Single Universal Encoder 2.5m Compact Universal Encoder

Frequency recommendations according to the thickness (T)

35 mm < Thickness < 65 mm = 2.25 MHz

15 mm < Thickness < 45 mm = 5 MHz

6 mm < Thickness < 18 mm = 7.5 MHz models or (D1A-003, D1S-002 or X2B-004)

Thickness < 6mm = 10 MHz (D1S-004 or X2B-008)

For further information, please contact the Sonatest Sales Team: sales@sonatest.com