Dual Linear Array (DLA) – Encoded Weld Inspection
Dual Linear Array probes provide an adaptive and modular solution for weld inspection of material with high signal attenuation as they can significantly improve signal to noise ratio.
Due to the material composition and grain structure, weld inspection of austenitic stainless steels and some other exotic material such as nickel alloys is difficult to perform with shear wave scans. With a dual linear Array (DLA) low signal noise resulting from the Pitch & Catch setup combined with the beam steering capabilities of phased array technology is supplemented with an advanced wedge configuration, to reduce the noise even further, In addition, the arrangement allows the probes to be located closer to the actual HAZ (heat affected zone) and the weld.
Recommended Package
|
Category |
Part Number |
Description |
|---|---|---|
|
Product |
VEO+32:64PR BNC |
VEO+ 32:64PR / 2UT:PR Kit BNC |
|
Product Option |
SW-VEO+PA32 |
Upgrade to 32 pulsers/receivers |
|
Probes |
D1B-002 (4x) |
D1B-5M32E-0.8x12 Note: 2.25 MHz and 7.5Mhz probes are also available |
|
Wedge |
D1BW wedges (2x) |
Note: The focal distance of the wedge is based on the thickness, outside diameter, weld configuration (width) and material type. Also Customised wedges are available to order. |
|
Cable |
D1-CABLE-003 (x2) |
1-CABLE-D-QX2 (Dual cable) - 2 meters |
|
Scanner |
JX-1001 or PX-MULTIMAG-2-VEO |
Jireh; 2 Probe PA/TOFD Scanner or Phoenix; VEO Multi Mag 2 (PA/TOFD) Scanner (including tubes and fitting) |
|
Irrigation Kit |
JX-1003 and JX-CMA014 or 196102 |
Jireh; Irrigation kit and 7.9 litre (2.1 US gallon) portable manual couplant pump or Phoenix; 7Lt Portable Hand Spray Kit |
For further information, please contact the Sonatest Sales Team: sales@sonatest.com